New Products

  1. Excl. VAT EU €35.00 Incl. VAT EU €43.40

    Make easy joints with the Domino DF700 insert set for the MF32 Multifunctional Router Jig. Replicate the same mortices as the Festool Domino DF700 using your hand held router and a 24mm copy ring.The Domino DF700 insert set includes 2 different widths, same as the Festool Domino DF700 machine. The widths that can be made are 13MM+Router bit diameter, 16,5MM+Router bit diameter. The bottom of the inserts have open pockets to allow dust and woodchips to be moved out better. Optimal minimum width for stock 45mm on the narrowest insert and 50mm on the medium insert. The depth of the mortice depends on the depth possibilities of your router and/or router bits. Both inserts have position mark for the correct location in the base and center marks on the side to allow positioning with marks on your workpiece.

    Learn More
  2. Excl. VAT EU €35.00 Incl. VAT EU €43.40

    Easily route the Hettich VB and Häfele Rafix connectors with the Rafix - VB connector insert and the MF32 Multifunctional Router Jig. The insert works with a 24mm copy ring and 5mm + 10mm router bits. The set includes the Rafix - VB Connector insert for the connectors and the center hole insert for the assembly screw. Rafix - VB Connector Insert has an offset of 9,5mm from the 0 mark on your base. The 9,5mm offset is the correct position for the Rafix and VB connectors. Both inserts have position mark for the correct location in the base and center marks on the side to allow positioning with marks on your workpiece.

    Learn More
  3. Excl. VAT EU €20.00 Incl. VAT EU €24.80

    The Dowel 32 insert for MF32 Multifunctional Router Jig allows you to make wooden dowel joinery with a 32mm spacing. The insert works with a 24mm copy ring and router and dedicated drill bits from 5 to 12MM with 8mm shank. You can also use this insert for making traditional RTA cam connectors such as Hettich Rastex or Häfele Minifix and the new Häfele Ixconnect. The insert has a position mark for the correct location in the base and 3 center marks on the side to allow positioning with marks on your workpiece. The outside marks are the center of each dowel hole and the middle mark is the center of the 32mm spacing.

    Learn More
  4. MF32 Multifunctional Router Jig

    Ships within 1-2 days
    Excl. VAT EU €220.00 Incl. VAT EU €272.80

    This MF32 Multifunctional Jig takes inserts to make the whole European standard system 32 range such as dowels, pin holes, drawer runners, handles, hinges, Domino DF500, Domino DF700, Lamello Cabineo and almost the full connector range of Hettich and Häfele! Inserts are used with router and 24MM copy ring. The jig also works with the Mafell Duo Dowel rail for fast, accurate and repeatable positions.

    The MF32 Multifunctional Jig is precision engineered from aluminium and naturally anodised for best protection.

    High precision slidable fence with measurements on both sides and adjustable stoppers which can be freely positioned to any point or positioned with spring loaded function every 10mm. This also makes it easy to use the jig for narrow stock.

    The base plate also has two measurement strips for high accuracy. It also allows you to move the fence based on centre positions of your inserts or centre positions of the system 32 holes.

    NON-EUROPEAN COUNTRIES - PLEASE NOTE THAT IF YOU ARE NOT FAMILIAR WITH THE EUROPEAN SYSTEM 32 STANDARD WAY OF WORKING, THIS MIGHT BE TO COMPLICATED AND NOT BE THE RIGHT PRODUCT FOR YOU.

    SEE INSTRUCTIONS HERE

    Learn More
  5. Excl. VAT EU €50.00 Incl. VAT EU €62.00

    Make easy joints with the Domino DF500 insert set for the MF32 Multifunctional Router Jig. Replicate the same mortices as the Festool Domino DF500 using your hand held router and a 24mm copy ring.The Domino DF500 insert set includes 3 different widths, same as the Festool Domino DF500 machine. The widths that can be made are 13MM+Router bit diameter, 19MM+Router bit diameter, 23MM+Router bit diameter. The bottom of the inserts have open pockets to allow dust and woodchips to be moved out better. Optimal minimum width for stock 45mm on the narrowest insert 50mm on the medium insert and 60 on the widest insert. The depth of the mortice depends on the depth possibilities of your router and/or router bits. All inserts have position mark for the correct location in the base and center marks on the side to allow positioning with marks on your workpiece.


    Learn More
  6. Excl. VAT EU €35.00 Incl. VAT EU €43.40

    Lamello Cabineo insert set allows you to make the slots to fit the Lamello Cabineo connectors for the MF32 Multifunctional Router Jig. The insert works with a 24mm copy ring and 5mm + 15mm router bits. The set includes the Cabineo insert for the connectors and the center hole insert for the assembly screw. Both inserts have position mark for the correct location in the base and center marks on the side to allow positioning with marks on your workpiece. The Cabineo insert has an offset of 3,6mm from the 0 mark on your base. The 3,6mm offset is the correct position for the Lamello Cabineo connectors. Use a 24mm copy ring with a 15MM router bit to plunge the holes.

    Learn More
  7. Excl. VAT EU €59.00 Incl. VAT EU €73.16

    Easily drill concealed cup hinges with drilling patterns 45/9,5 with the hinge insert for MF32 Multifunctional Router Jig. The drilling patterns 45/9,5 will work for concealed cup hinges of Hettich, Häfele, Blum and Grass. Make sure you have the correct hinges with the 45/9,5 patterns as many brands have different drilling pattern options. The hinge insert comes with a depth gauge for 10mm continues shanks. The 2 smaller outside holes fit a 24mm copy ring so you can pre drill with a 10mm or 8mm router/drill bit and your router the holes if you use press fit, flash fit or fix fast assembly. The insert has a position mark for the correct location in the base and center marks on the side to allow positioning with marks on your workpiece.


    Learn More